Commercial Automatic Fire Extinguisher 50L Type Fm200 Fire Extinguishing Device
Parameter:
| No. | Specification | Technical Parameter |
| 1 | Filling pressure | 1.6Mpa |
| 2 | Spraying time | ≤8s |
| 3 | Working temperature | 0～50℃ |
| 4 | Starting mode | Automatic |
Description:
Fm200(hfc-227ea) is a kind of colorless and tasteless and non-corrosive and electricity-insulating gas without residue and pollution after extinguishing. And ODP of it is zero. It is a friendly-environment gas to be used for extinguishing. Also, because of such feature, it can be used in special place where electrical fire is easy to happen.
Through little glass tube and contraction principle, it can be automatic fire extinguisher without any manual manipulation.
Working principle:
When a fire happens, this two type hanging fm200 fire suppression system has different activating mode.
The electromagnetic hanging type fm200 fire suppression system:
A fire happens → A smoke / heat detector activates and send a signal to the control panel → control panel receives the signal and activate the alarm bell to notify people that quickly escape from the building → control panel receive both signals from smoke and heat detector, and then activate the electromagnetic hanging type fm200 fire suppression system.
The temperature-based hanging type fm200 fire extinguisher:
A fire happens → the temperature climbs high fast → temperature exceeds the specified temperature of the temperature sensing glass ball → the temperature sensing glass ball is burnt by the high temperature → the fm200 fire agent comes out from the cylinder through nozzle for putting out the fire.
Competitive Advantage:
It is very efficient for you to protect your possession. Since it is a system, it include extinguishing device to put out fire at short time, specially, shorter than eight second. It means all agent will be discharged in so short time. Then it will be flooding overall.
Fm200 automatic fire extinguisher is easiest to be installed and it will save much space after installation. Meanwhile, of course, it will be cheaper without matching electrical accessories or pipe fittings. It is suitable for little rooms and multiple zones.
Simulated diagram:
Below attached is one mimic diagram of Automatic Fire Extinguisher Of 50l Type Fm200 Device
Attentions:
1/ The whole fire suppression system needs at least one check yearly. In fact, some components need a check weekly, some monthly and the whole system yearly. This is the proper frequency of the checking for the fire suppression system according to our manual instruction and professional’s idea.
2/ One protected zone may install at most one temperature-based hanging type fm200 fire extinguisher. When there is a fire, the temperature difference may be unable to let the fire extinguisher work at the same time, which may bring about the consequence that there is not enough fire agent to put out the fire.
Product Tags:
|
|
Commercial Automatic Fire Extinguisher 50L Type Fm200 Fire Extinguishing Device Images
|
